Spot Weld Tensile Testing Machines

JANDA offers both horizontal and vertical models. JANDA also designs and builds Special Tensile Testers to meet your application.

• Hand or motor operated
• Machine calibrated and certified to meet mil spec. requirements
• High speed micro processor digital read out with large LCD display with optional RS-232 output
• Tension load cell within 2.50% accuracy up to 10 ,000 lbs.
• Knurl grips with free rotating clamp handles. By pushing in center handles, handles can be set for 1/4” turn lock or unlock.
• Fast return knob allows operator to pull knob back and rapidly turn knob for reset or pull position
• Easy load of coupons
• Motor Operated Model includes 1/4 h.p. 90 V.D.C. Gear Motor, 180 RPM with right angle Drive & SCR Speed Reducer. Forward and Reverse operation with Micro E/S cut-outs.
• Unit i s portable – Weight: 28 lbs.
• Measurements: 7” x 7” x 20” long 110 V.A.C. input

JANDA Model 300TT Vertical Tensile Tester

• Motor—Hydraulic operated
• Machine calibrated and certified to meet mil spec. requirements
• High speed micro processor digital read out with large LCD display with optional RS-232 output
• Tension load cell within 2.50% accuracy up to 20 ,000 lbs.
• Taper lock knurl grips with positive lock and release handles
• 5 position upper section vertical adjustment in 5” increments
• Easy load of coupons
• Adjustable volume speed control
• Approximate weight: 360 lbs. 110 VAC (15 amp input)

NOTE: Capacity ranges 5,000 - 10,000 - 20,000 lbs home