SPECIAL WELDERS
Home Page
JANDA has designed and built over 3000 machines made specifically for customers application, utilizing state of art  technology, the highest quality components and workmanship, most efficient design, best price available and fastest delivery –  GUARANTEED

JANDA has designed all types of machines for the Aerospace industry and Government contracts from ammo box lines with quad head seam welders to landing matt multi-heads. 

For the building industry, mesh welders, corner mesh welders with roll formers, feed reel stations, wire pullers, form stations, cut-off table and wire guide systems to Joist welders, cup floor welders, truss welders, door welders, floor panels, elevators, fireplaces, and chimney pipes.

For wire  products, every conceivable rack, basket, shopping cart lines, shelving, wire pallets, over 1,000 different machines. 

For the sheet metal industry, cabinets, drawers, shelves, metal office furniture, computer, T.V., dishwasher and oven chassis’s, slot machines,  transformer plate welders, seat frames, brake shoe welders, truck frames, concrete cage welders, solar panel welders, dimple welders. 

     

S1
Brake Shoe Welder

S2
Multi-Head Transformer Plate Welder w/ Automatic carriage, feeder, unloader and stacker


S3
Special 10 Weld Gun with two Automatic 4 Position Orbital Riveters and 4 Position Weld Index Table

S5
Dual Head Hinge Welder with Janda J600 weld control. Machine has up-down, left-right tilt adjustment and projection part locator. 200 KVA 1 Phase

 


S4

AUTOMATIC FOUR STATION MULTI-HEAD WELDER

STATION NO. 1: Operator loads parts into nest fixture and onto locator pins. Initiates machine and fixture moves into Position No. 2.

STATION NO. 2: 10 guns weld then index over 1”, 8 guns weld corners, then fixture moves to Position No. 3.

STATION NO. 3: 20 guns move in and weld “up”, retract and fixture rotates 180 degrees. All 20 guns index over 1” and weld again, then fixture moves to Position No. 4.

STATION NO. 4: Same as Station No. 3 but guns weld “down”, then fixture moves to unload position.

Part is unloaded with an automatic vacuum unloader.

Two fixtures can be utilized at the same time producing 50 to 60 parts per hour!

 

S6
6 Head Multi Welder for Seat Frames. (Machine designed, built and demonstrated under power on application in 7 days.)

 

 


S7
Adjustable Cabinet Welder with in-out Weld Fixture

 

S8
Medicine Cabinet Hinge Welder
S9
Traveling Six Gun Multi-Head Welder

S10
Multi-Head Plate Welder with Carriage/Table and Automatic Indexer.

 
S11
16 Gun Multi-Head w/ Gun Shift
S12
100 KVA Butt Welder w / Automatic Part Eject and Chute
S13
Dual 200 KVA Press Type Welders to weld .080 to .080 aluminum - Right machine is fully adjustable.

 

 
S14
Automatic Drawer Welder — 18” to 48” width
S15
Cathode Ray Tube , Splice Welder
S16
300 KVA Horizontal Press Welder

S17

Multi-Head Hinge Welder
S18
Seat Frame Welder
S19
Band Splice Welder
S20
JANDA Concrete Cage Welder with Drum & Wire Straightener
S21
Special Multi-Head Welder with Automatic Table
S22
Multi Gun Table Top Welder w/ Fixture for Paper Dispenser
S23
Table Top 8-gun Inverter Multi-Head Welder with 3 position Weld Table for welding .005 to .005 copper

S24
JANDA Special Multi-Head welder Model M60-11-80-1C8T with automatic carriage, fixture and custom hopper that automatically drops each wire into the weld fixture.

 

 
S25
Chimney Pipe End Cap Welders to weld 6”, 7” & 8” Pipes
S26
S27
JANDA Cage Welder Station with 5069 Weld Heads, platens, ram house, weld transformer, shunts and weld control.
S28
250 KVA Series Seam Welder for welding Stainless Steel Cooling Fin from 2” to 12” dia.—both ends at once
S29
S30
Two to eight gun Open End Multi-Welder Throat 36” to 98”

S31
Janda Model TR-6T-100 Semi automatic 6” Truss welding machine.  Complete with the following:Income Guide, Three (3) half wire straighteners, Signal Former, Four gun weld station, Optional end gross wire two (2) weld guns, pneumatic shear.This machine index’s, stops to weld and index’s to next weld position at approx. 30 feet per minute. Janda Model TRS-6T-100 is fully automatic, employing Janda 6030 seam weld heads, gear former and flying shear.  Runs at  approx. 100 feet per minute.


S32
 
S34
16 Weld Head to weld rings on Hydra tube
 
 
Forward Position
S36
Two JANDA 170 KVA Inverter Press Type welders for welding various width aluminum (.090 to .090) panels. Both 36" throat and 18" throat welders are mounted on common base. Machine on right adjusts in and out.
 
S37
Platten Press Welder with six (6) 5" bore weld heads with adjustable weld stroke connected to six (6) 100 KVA transformers with automatic carriage.

 

S39
4 Gun Horizontal Tube welder to weld inner ring to spacer

S41
Dual Head Longitudinal Seam Welder with 170 KVA Inverter transformer, pneumatic part clamp, splash pan with pump and side guards.

S43
Two Gun C-Type Welder with 24" throat, 120 KVA dual secondary transformer and WTC 2050 weld control.

S45
Model PGP-2-31 Poke Gun with cart including Janda Model J400 weld control and transformer.

S47
Floor Panel welders with 16 weld guns, ball screw power drive tables and carriages with automatic index, clamping and pin location.

S49
 

S50
 


S52
 

S

S54
Semi-automatic Stud Welder

S56
Two Head Multi Welder


S31S home

S33
 
 
S35
JANDA Model TG-3040-85MF:
X-Y Gun plus 350 degree rotaion with 85 KVA Inverter power supply, power up - down table.
• X-Y can be power driven and programmed
• Weld Gun has 3 1/4" bore weld cylinder
 
OPTIONAL:
Two (2) vertical weld guns that can adjust between centerlines
 
S38
Horizontal Welder for Door Frames
 
 
 

S40
4 Gun Horizontal Tube welder to weld outer ring to spacer

S42
Four Gun Up-Down Welder for projection welding of both sides of door panels to inside channel.

S44
100 KVA Horizontal Press Type Welder

S46
5 Position Table Top Multi-Head Welder, 85 KVA, to weld 3 & 4 wire, round and rectangle chair assemblies.

S48
Vertical Stitch-Seam Welder machine has two Inverter power supplies and two weld heads that move in on each side then weld up (down) 2 1/2" with spots set from 20 spots to 10 spots per inch, on this .003 to .008 S.S. heat exchanger. Machine also spreads and holds part while welding and then indexes to next postion after moving both weld heads out.

S51
Special Multi-Head Welder with Power Table and Fixture

S53
Dual Head Vertical Press Type Welder with upper ram and lower weld die mount with wheel adjustment.

S55
Roll Former