SEAM WELDERS

JANDA offers the most extensive standard line of Seam Welders available. Rocker Arm, Press Type Circumferential, Press Type Longitudinal - Single Phase , Three Phase, AC, DC and Frequency Inverter
Home Page

Rocker Arm Seam Welders

FEATURES
  • Internally water-cooled weld heads
  • Lower weld head moves in-out thru key
  • Lower weld knee moves up-down to accommodate up to two 8” wheels or down to 6” upper and 1 1/2” lower wheel
  • Dual pressure air system
  • Power driven upper head thru D.C. clutch / brake and adjustable speed control
  • Solid state weld control with continuous and roll-spot function
  • Two stage foot switch and eight point tap switch

Roll Spot 100 KVA

home  

200 KVA

MODEL

KVA

THROAT

VOLTAGE

SR-25-14

SR-25-20

25

14

20

220 OR 440

SR-50-16

SR-50-22

50

16

22

220 OR 440

SR-75-18

SR-75-24

75

18

24

220 OR 440

Press Type Seam Welders - AC Single Phase


A
JANDA MODEL PS-45-18D 18” Throat, 30 KVA or 45 KVA dual voltage weld transformer with lower extension mandrel and support. Weld heads are internally water cooled and can be ordered with upper or lower or dual drive. These machines use a 3 1/4” bore x 2” stroke cylinder and a re-generative drive motor.




C
JANDA Model PTS2L-50-18 Press Type Longitudinal Seam Welder. Upper bushing type weld head is internally water-cooled thru rotating ejector.


E
MODEL PTS2L-50-18 Longitudinal Seam Welder with 18" throat, 85 KVA Fixture Transformer and additional Upper Knurl Attachment.

G
Janda Model PTS2-50-18 50 KVA Circumferential Seam Welder

 

B
JANDA MODEL PS-45-24D As above but with 24” Throat



D
 

F
Model PTS2L-50-24 Longitudinal Seam Welder with 24" throat.

H
Janda Model PTS3-150-18DD 150 KVA Circumferential Seam Welder with Janda bushing type seam weld heads, dual drive and Tip Dress.