FUSION WELDERS

Home Page
A

JANDA Model GMAW-1-12 Special Seam Welder with Automatic Weld Head and Clamping.

B

Rotary Mig Welder Station to weld inside of brake assembly

C

JANDA Model GMAW-1-10 Door Mig Seam Welder with Miller Power Supply

D

Rebuild of existing Jet Line Fusion Seam Welder with new AVC-5 control and Janda MG-200 Tig welder motion control. home
 
E
    
 
Janda Model GMAW-30 Gantry Fusion Welder with "open end" can weld flat sheets 30 feet long 14 GA to 3/8" thick plate and as small as 6 feet diameter tanks. Machine has (61) 6" clamp dies on each side of copper purge system. Torch is mounted on gantry and has 32 feet of guided travel within 1/32 from end to end.
  

F
Janda Model GMAW-30-84 Circumferential Seam Welder with Seam Tracker -up to 5 R.P.M., 8" to 30" diameter x 84" lengths. Face plate has 3-post hydraulic clamp, adjustable hydraulic tank lift, automatic tailstock clamp with 10" stroke x 4" bore, Timken insulated rotary tail center. Electro-numatic brake on tail stock and upper track. Allen Bradley PLC up tp 10,000 lb. capacity.

 

 

 

 

 

 

 

 

 

 

 

 

G
Model HP-3000 Horizontal Weld Positioner with 1.4 RPM variable speed output. 115 VAC 10 amps